filling_out_a_launch_card
This is an old revision of the document!
Filling out a launch card
| Date | dd/mm/yy |
| Description | Brief description of the flight. |
| Launch Time | hh:mm GMT |
| WX | Weather conditions at launch |
| Balloon Size | e.g. 1500g Latex |
| Target Neck Lift | As calculated from the Burst1a spreadsheet |
| Target Asc. Rate | As entered into Burst1a |
| Neck Load | Weight of everything hanging from the neck of the balloon, measured value at launch |
| Neck Lift | Lift of balloon with nothing attached |
| Parachute Details | e.g. diameter and construction |
| Estimated Burst Altitude | As calculated from the Burst1a spreadsheet |
| Cutdown Criteria | Are we flying a cutdown? If so what are its firing conditions? |
| Telemetry Details | Type of transmitter, mode, baud rate and frequency e.g Radiometrix 10mW 50baud RTTY on 454.525MHz USB |
| Notes from Launch Card | Notes recorded at the time of launch, e.g. any problems |
filling_out_a_launch_card.1256329936.txt.gz · Last modified: 2009/10/23 20:32 by fnoble
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
