pcb_checklist
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
pcb_checklist [2016/04/14 10:36] ag611 |
pcb_checklist [2016/07/20 15:41] (current) ag611 |
||
|---|---|---|---|
| Line 20: | Line 20: | ||
| - Decoupling capacitors all close to IC power pins, with smallest values closest to the pins | - Decoupling capacitors all close to IC power pins, with smallest values closest to the pins | ||
| - Power nets as simple and tree-like as possible. Avoid loops | - Power nets as simple and tree-like as possible. Avoid loops | ||
| + | - Ground pours should have a bit more clearance than the minimum | ||
| + | - Stitch ground planes together well if using more than one | ||
| - Crystal traces as short and symmetrical as possible | - Crystal traces as short and symmetrical as possible | ||
| - ESD diodes as close to connector pins as possible | - ESD diodes as close to connector pins as possible | ||
pcb_checklist.txt ยท Last modified: 2016/07/20 15:41 by ag611
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
